Remarking
Decals, Placard and Marking
Perform the following procedure to remove decals, placard and marking from the airplane.
1. Remove the damaged placard, decals and marking.
2. Clean the area of sufficient size removing dirt, soil, and other foreign material with isopropyl alcohol.
On the fuselage and the vertical stabilizer, and all interior surface ( composite or polymer surfaces ), remove the old placard, decals and marking from any composite surface, such as the fuselage, by using a suitable plastic scraper.
When removing any placard, decals and marking from exterior surface, do not remove any of the surface finish. Remove any adhesive residual by using a surface cleaner, such as isopropyl or denatured alcohol on a soft cloth. Do not use any type of chemical solvent, such as methyl-ethyl-ketone (M.E.K) or acetone, on any of the composite or finished surfaces.
PLACARD, DECALS AND MARKING INSTALLATION
Perform this procedure to install a placard, decals and marking.
1. Clean an area of sufficient size removing dirt, soil, and other foreign material with isopropyl alcohol.
2. Peel off backing from self-adhesive vinyl placard, decals and marking.
3. Mount placard in appropriate position and appropriate orientation.
4. Use a plastic spatula to remove air bubbles from under the placard, decals and marking. This completes the placard installation procedure.
PT. Putra Bangsa Sejati has experts who are very much experienced in the field of removal and installation of placard, decals and marking using standard procedures regulation in the flight regulation and have a high ability to produce the best quality in serving customers.
